VK1KCM-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK1KCM-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784560164	0.02 Rx Erlang	0 Tx Erlang	11 count/10m	6 count/10m	3 count/10m
1784558964	0.02 Rx Erlang	0 Tx Erlang	10 count/10m	8 count/10m	2 count/10m
1784557764	0.02 Rx Erlang	0 Tx Erlang	12 count/10m	9 count/10m	3 count/10m
1784556564	0.02 Rx Erlang	0 Tx Erlang	11 count/10m	8 count/10m	3 count/10m
1784555364	0.02 Rx Erlang	0 Tx Erlang	11 count/10m	9 count/10m	2 count/10m
1784554164	0.02 Rx Erlang	0 Tx Erlang	9 count/10m	9 count/10m	2 count/10m
1784552964	0.02 Rx Erlang	0 Tx Erlang	10 count/10m	8 count/10m	3 count/10m
1784551764	0.02 Rx Erlang	0 Tx Erlang	10 count/10m	8 count/10m	3 count/10m
1784550564	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	7 count/10m	2 count/10m
1784549364	0.03 Rx Erlang	0 Tx Erlang	22 count/10m	8 count/10m	3 count/10m
1784548164	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	9 count/10m	3 count/10m
1784546964	0.04 Rx Erlang	0 Tx Erlang	26 count/10m	11 count/10m	3 count/10m
1784545764	0.02 Rx Erlang	0 Tx Erlang	12 count/10m	9 count/10m	2 count/10m
1784544564	0.04 Rx Erlang	0 Tx Erlang	27 count/10m	12 count/10m	2 count/10m
1784543364	0.02 Rx Erlang	0 Tx Erlang	16 count/10m	9 count/10m	3 count/10m
1784542164	0.03 Rx Erlang	0 Tx Erlang	19 count/10m	11 count/10m	2 count/10m
1784540964	0.04 Rx Erlang	0 Tx Erlang	25 count/10m	12 count/10m	3 count/10m
1784539764	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	9 count/10m	2 count/10m
1784538564	0.02 Rx Erlang	0 Tx Erlang	17 count/10m	7 count/10m	3 count/10m
1784537364	0.02 Rx Erlang	0 Tx Erlang	12 count/10m	8 count/10m	2 count/10m
1784536164	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	5 count/10m	3 count/10m
1784534964	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	5 count/10m	2 count/10m
1784533764	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	6 count/10m	2 count/10m
1784532564	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	5 count/10m	3 count/10m
1784531364	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	5 count/10m	2 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)