EL-PY2HGW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-PY2HGW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765583861	0 RX Erlang	672 TX Erlang	0 RXcount/10m	28 TXcount/10m
1765582061	1 RX Erlang	47 TX Erlang	3 RXcount/10m	15 TXcount/10m
1765579961	0 RX Erlang	635 TX Erlang	0 RXcount/10m	29 TXcount/10m
1765578161	0 RX Erlang	878 TX Erlang	0 RXcount/10m	46 TXcount/10m
1765576361	0 RX Erlang	818 TX Erlang	0 RXcount/10m	59 TXcount/10m
1765574561	1 RX Erlang	544 TX Erlang	2 RXcount/10m	70 TXcount/10m
1765572761	0 RX Erlang	12 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765570661	0 RX Erlang	6 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765568861	0 RX Erlang	8 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765567061	0 RX Erlang	8 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765565261	0 RX Erlang	5 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765563461	0 RX Erlang	36 TX Erlang	0 RXcount/10m	14 TXcount/10m
1765561661	0 RX Erlang	29 TX Erlang	0 RXcount/10m	13 TXcount/10m
1765559861	0 RX Erlang	544 TX Erlang	0 RXcount/10m	33 TXcount/10m
1765558061	0 RX Erlang	282 TX Erlang	0 RXcount/10m	104 TXcount/10m
1765556261	0 RX Erlang	666 TX Erlang	0 RXcount/10m	64 TXcount/10m
1765554461	0 RX Erlang	910 TX Erlang	0 RXcount/10m	61 TXcount/10m
1765552661	0 RX Erlang	547 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765549061	0 RX Erlang	331 TX Erlang	0 RXcount/10m	15 TXcount/10m
1765543661	0 RX Erlang	960 TX Erlang	0 RXcount/10m	16 TXcount/10m
1765541861	0 RX Erlang	462 TX Erlang	0 RXcount/10m	11 TXcount/10m
1765538261	0 RX Erlang	272 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765536461	0 RX Erlang	681 TX Erlang	0 RXcount/10m	31 TXcount/10m
1765534661	0 RX Erlang	946 TX Erlang	0 RXcount/10m	28 TXcount/10m
1765532861	0 RX Erlang	898 TX Erlang	0 RXcount/10m	30 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)