Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object 9M4GJS-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Cpu* Temp* FreeM* RxP* TxP*
1761517169 0.43 Load 52.08 DegC 163 Mb 629 Pkt 124 Pkt
1761516868 0.45 Load 51.54 DegC 165 Mb 571 Pkt 61 Pkt
1761516568 0.46 Load 51.54 DegC 165 Mb 643 Pkt 126 Pkt
1761516269 0.51 Load 52.08 DegC 165 Mb 590 Pkt 75 Pkt
1761515973 0.54 Load 52.62 DegC 175 Mb 651 Pkt 142 Pkt
1761515668 0.59 Load 52.08 DegC 176 Mb 613 Pkt 104 Pkt
1761515369 0.44 Load 51.54 DegC 175 Mb 619 Pkt 97 Pkt
1761515068 0.51 Load 52.08 DegC 177 Mb 658 Pkt 155 Pkt
1761514768 0.42 Load 51.54 DegC 167 Mb 579 Pkt 62 Pkt
1761514469 0.5 Load 52.08 DegC 173 Mb 596 Pkt 65 Pkt
1761514168 0.49 Load 52.08 DegC 162 Mb 655 Pkt 177 Pkt
1761513868 0.5 Load 52.08 DegC 173 Mb 609 Pkt 92 Pkt
1761513569 0.46 Load 52.08 DegC 174 Mb 592 Pkt 59 Pkt
1761513269 0.5 Load 52.62 DegC 174 Mb 615 Pkt 136 Pkt
1761512968 0.49 Load 52.08 DegC 176 Mb 597 Pkt 61 Pkt
1761512669 0.49 Load 52.08 DegC 176 Mb 632 Pkt 146 Pkt
1761512369 0.44 Load 52.08 DegC 168 Mb 594 Pkt 52 Pkt
1761512068 0.57 Load 52.62 DegC 176 Mb 660 Pkt 111 Pkt
1761511772 0.56 Load 52.62 DegC 176 Mb 657 Pkt 142 Pkt
1761511469 0.55 Load 52.62 DegC 164 Mb 587 Pkt 69 Pkt
1761511168 0.52 Load 52.08 DegC 169 Mb 896 Pkt 127 Pkt
1761510868 0.5 Load 52.08 DegC 162 Mb 575 Pkt 61 Pkt
1761510569 0.49 Load 52.62 DegC 168 Mb 724 Pkt 218 Pkt
1761510269 0.49 Load 52.62 DegC 175 Mb 613 Pkt 71 Pkt
1761509968 0.52 Load 52.62 DegC 171 Mb 706 Pkt 116 Pkt
*Used Equation Coefficients:
Cpu: 0, 0.001, 0
Temp: 0, 0.001, 0
FreeM: 0, 1, 0
RxP: 0, 1, 0
TxP: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)