HS5TQA-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*	SAT*
1780897233	40.36 °C	3.93 %RH	2059 hPa	411 V	19
1780896596	40.59 °C	3.93 %RH	2058 hPa	411 V	19
1780895970	40.74 °C	3.97 %RH	2058 hPa	411 V	20
1780895333	40.75 °C	3.99 %RH	2057 hPa	411 V	18
1780894292	40.93 °C	4.01 %RH	2059 hPa	411 V	18
1780893670	40.9 °C	4.05 %RH	2060 hPa	411 V	19
1780893034	40.9 °C	4.05 %RH	2061 hPa	411 V	18
1780892396	40.79 °C	4.06 %RH	2062 hPa	411 V	20
1780891778	40.52 °C	4.07 %RH	2062 hPa	411 V	20
1780891137	40.29 °C	4.08 %RH	2063 hPa	411 V	19
1780890544	40.36 °C	4.11 %RH	2063 hPa	411 V	20
1780889907	39.93 °C	4.11 %RH	2064 hPa	411 V	21
1780889266	39.79 °C	4.15 %RH	2063 hPa	411 V	22
1780888630	39.74 °C	4.19 %RH	2064 hPa	411 V	23
1780887989	39.38 °C	4.27 %RH	2065 hPa	411 V	20
1780887358	39.11 °C	4.33 %RH	2066 hPa	411 V	21
1780886714	39.24 °C	4.36 %RH	2066 hPa	411 V	19
1780886073	38.79 °C	4.42 %RH	2067 hPa	411 V	20
1780885435	38.47 °C	4.48 %RH	2068 hPa	411 V	19
1780884798	38.11 °C	4.54 %RH	2067 hPa	411 V	19
1780884157	37.84 °C	4.59 %RH	2068 hPa	411 V	20
1780883520	37.56 °C	4.63 %RH	2069 hPa	410 V	18
1780882882	37.34 °C	4.68 %RH	2069 hPa	410 V	21
1780882241	37.02 °C	4.8 %RH	2068 hPa	411 V	18
1780881604	36.81 °C	4.89 %RH	2069 hPa	411 V	20

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.01, 0

BAR: 0, 1, 0

BAT: 0, 1, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)