HS6HJP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6HJP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*
1775026336	33 ug/m3	52 ug/m3	64 ug/m3	-51 dBm
1775026027	35 ug/m3	55 ug/m3	66 ug/m3	-51 dBm
1775025103	36 ug/m3	55 ug/m3	66 ug/m3	-53 dBm
1775023535	34 ug/m3	54 ug/m3	65 ug/m3	-55 dBm
1775022792	33 ug/m3	54 ug/m3	65 ug/m3	-55 dBm
1775021867	36 ug/m3	57 ug/m3	67 ug/m3	-57 dBm
1775020943	34 ug/m3	53 ug/m3	65 ug/m3	-56 dBm
1775020269	32 ug/m3	49 ug/m3	60 ug/m3	-54 dBm
1775019345	29 ug/m3	44 ug/m3	53 ug/m3	-54 dBm
1775018420	27 ug/m3	43 ug/m3	51 ug/m3	-54 dBm
1775017496	26 ug/m3	39 ug/m3	46 ug/m3	-51 dBm
1775014571	20 ug/m3	30 ug/m3	31 ug/m3	-49 dBm
1775014269	21 ug/m3	30 ug/m3	33 ug/m3	-51 dBm
1775013345	19 ug/m3	30 ug/m3	32 ug/m3	-53 dBm
1775012420	21 ug/m3	29 ug/m3	30 ug/m3	-56 dBm
1775012228	21 ug/m3	31 ug/m3	33 ug/m3	-52 dBm
1775011303	19 ug/m3	30 ug/m3	33 ug/m3	-53 dBm
1775010379	21 ug/m3	31 ug/m3	32 ug/m3	-53 dBm
1775009454	21 ug/m3	31 ug/m3	33 ug/m3	-54 dBm
1775008530	21 ug/m3	30 ug/m3	32 ug/m3	-52 dBm
1775007606	21 ug/m3	31 ug/m3	33 ug/m3	-52 dBm
1774974306	35 ug/m3	53 ug/m3	65 ug/m3	-50 dBm
1774973382	33 ug/m3	53 ug/m3	65 ug/m3	-50 dBm
1774972457	34 ug/m3	52 ug/m3	64 ug/m3	-51 dBm
1774971533	32 ug/m3	50 ug/m3	61 ug/m3	-51 dBm

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)