MB7USH-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7USH-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Mains*	Battery*	Temp*	Humid*	CPU.Temp*
1765590702	244 V	13.27 V	8.6 deg.C	92.8 %	45.6 deg.C
1765590403	244 V	13.22 V	8.7 deg.C	92.9 %	45.1 deg.C
1765590103	246 V	13.23 V	8.7 deg.C	92.8 %	45.6 deg.C
1765589803	246 V	13.22 V	8.7 deg.C	92.8 %	45.6 deg.C
1765589503	247 V	13.22 V	8.8 deg.C	92.8 %	46.2 deg.C
1765589202	245 V	13.22 V	8.9 deg.C	93 %	46.2 deg.C
1765588902	245 V	13.2 V	8.9 deg.C	93 %	46.2 deg.C
1765588602	245 V	13.26 V	8.9 deg.C	93.1 %	46.2 deg.C
1765588302	245 V	13.26 V	9 deg.C	93 %	46.2 deg.C
1765588002	243 V	13.26 V	8.9 deg.C	93 %	46.2 deg.C
1765587702	244 V	13.27 V	9 deg.C	93 %	45.1 deg.C
1765587402	247 V	13.27 V	9 deg.C	93 %	46.2 deg.C
1765587102	247 V	13.21 V	9.1 deg.C	93.2 %	46.7 deg.C
1765586802	245 V	13.21 V	9.1 deg.C	93.2 %	46.2 deg.C
1765586502	245 V	13.22 V	9.1 deg.C	93.1 %	46.2 deg.C
1765586202	246 V	13.23 V	9.1 deg.C	93.1 %	46.2 deg.C
1765585902	245 V	13.2 V	9.1 deg.C	93 %	46.2 deg.C
1765585603	246 V	13.26 V	9.2 deg.C	93 %	46.7 deg.C
1765585303	245 V	13.27 V	9.2 deg.C	93 %	46.7 deg.C
1765585002	245 V	13.27 V	9.2 deg.C	93 %	46.2 deg.C
1765584702	246 V	13.21 V	9.3 deg.C	93 %	46.7 deg.C
1765584402	245 V	13.27 V	9.3 deg.C	93 %	46.7 deg.C
1765584102	243 V	13.2 V	9.3 deg.C	93 %	46.2 deg.C
1765583802	244 V	13.27 V	9.3 deg.C	93 %	46.2 deg.C
1765583502	244 V	13.21 V	9.3 deg.C	92.9 %	46.2 deg.C

*Used Equation Coefficients:

Mains: 0, 1, 0

Battery: 0, 1, 0

Temp: 0, 1, 0

Humid: 0, 1, 0

CPU.Temp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)