TA3GR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3GR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753991504	6 Pkt	4 Pkt	26 Pkt	-31 dBm	12.1 V
1753990872	0 Pkt	10 Pkt	27 Pkt	-31 dBm	12.1 V
1753988978	1 Pkt	6 Pkt	12 Pkt	-31 dBm	12.1 V
1753988349	4 Pkt	1 Pkt	7 Pkt	-31 dBm	12.1 V
1753987724	1 Pkt	2 Pkt	11 Pkt	-31 dBm	12.1 V
1753987098	1 Pkt	1 Pkt	12 Pkt	-30 dBm	12.1 V
1753986474	4 Pkt	10 Pkt	5 Pkt	-31 dBm	12.1 V
1753985840	1 Pkt	15 Pkt	9 Pkt	-32 dBm	12.1 V
1753985201	1 Pkt	16 Pkt	18 Pkt	-31 dBm	12.1 V
1753984563	4 Pkt	2 Pkt	12 Pkt	-32 dBm	12.1 V
1753983043	1 Pkt	26 Pkt	15 Pkt	-31 dBm	12.1 V
1753982399	3 Pkt	14 Pkt	17 Pkt	-31 dBm	12.1 V
1753981761	4 Pkt	8 Pkt	12 Pkt	-31 dBm	12.1 V
1753981130	0 Pkt	5 Pkt	12 Pkt	-32 dBm	12.1 V
1753980503	5 Pkt	18 Pkt	16 Pkt	-32 dBm	12.1 V
1753979870	3 Pkt	9 Pkt	22 Pkt	-32 dBm	12.1 V
1753979224	4 Pkt	10 Pkt	18 Pkt	-31 dBm	12.08 V
1753978588	1 Pkt	6 Pkt	24 Pkt	-32 dBm	12.08 V
1753977957	5 Pkt	11 Pkt	20 Pkt	-31 dBm	12.1 V
1753977320	0 Pkt	11 Pkt	12 Pkt	-32 dBm	12.08 V
1753976685	5 Pkt	17 Pkt	16 Pkt	-31 dBm	12.1 V
1753976048	11 Pkt	5 Pkt	16 Pkt	-32 dBm	12.08 V
1753975418	1 Pkt	7 Pkt	11 Pkt	-32 dBm	12.1 V
1753974786	6 Pkt	11 Pkt	7 Pkt	-31 dBm	12.1 V
1753974148	5 Pkt	5 Pkt	15 Pkt	-32 dBm	12.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)