OTISMA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OTISMA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*
1788615798	40 Pkt	33 Pcnt
1788615497	60 Pkt	41 Pcnt
1788615197	70 Pkt	47 Pcnt
1788614897	80 Pkt	50 Pcnt
1788614597	90 Pkt	53 Pcnt
1788614296	100 Pkt	53 Pcnt
1788613996	110 Pkt	54 Pcnt
1788613696	130 Pkt	57 Pcnt
1788613395	140 Pkt	58 Pcnt
1788613095	140 Pkt	60 Pcnt
1788612795	150 Pkt	60 Pcnt
1788612495	140 Pkt	60 Pcnt
1788612194	130 Pkt	62 Pcnt
1788611894	130 Pkt	61 Pcnt
1788611594	130 Pkt	57 Pcnt
1788611293	140 Pkt	60 Pcnt
1788610993	130 Pkt	59 Pcnt
1788610693	140 Pkt	61 Pcnt
1788610392	140 Pkt	61 Pcnt
1788610092	140 Pkt	65 Pcnt
1788609792	140 Pkt	67 Pcnt
1788609492	140 Pkt	66 Pcnt
1788609191	140 Pkt	68 Pcnt
1788608891	150 Pkt	70 Pcnt
1788608591	160 Pkt	71 Pcnt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)