S55YKU-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YKU-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Accu1*	Temp1*	Temp2*
1781528423	13.58 Volt	330 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781528421	13.58 Volt	330 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781526622	13.58 Volt	330 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781525721	13.58 Volt	330 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781524822	13.58 Volt	330 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781523023	13.58 Volt	310 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781523021	13.58 Volt	310 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781521226	13.35 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781520321	13.58 Volt	310 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781519423	13.58 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781517623	13.58 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781517621	13.58 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781515822	13.58 Volt	330 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781514921	13.2 Volt	320 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781514022	13.58 Volt	320 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781512240	13.58 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781512240	13.58 Volt	320 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781510423	13.58 Volt	300 Pkt	13.6 Volt	23.5 Cel.	19.2 Cel.
1781509521	13.58 Volt	280 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781508625	13.58 Volt	260 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781506822	13.58 Volt	260 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781506822	13.58 Volt	260 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781505022	13.58 Volt	260 Pkt	13.6 Volt	23 Cel.	19.2 Cel.
1781504121	13.58 Volt	230 Pkt	13.6 Volt	22.5 Cel.	19.2 Cel.
1781503222	13.58 Volt	230 Pkt	13.6 Volt	22.5 Cel.	19.2 Cel.

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Accu1: 0, 0.1, 0

Temp1: 0, 0.5, -71

Temp2: 0, 0.2, -6.4

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)